4th Generation Self tapping screw for soft, thermo plastic!

Plastics are much weaker than steel. Therefore, to prevent the plastic unit breaking or
cracking, SAIMA strongly recommend to use speciallized screw for plastic”non-sert”.

No Metal Insert Required

Possible to reduce the cost without metal insert.
No need to remove metal insert when you recycle.
non-sert® will help you save total cost and time.

Sharp Thread Angle “30°”

Less stress and cracking on your plastic product.

Best for Repeat Use

Trilobular thread = Low driving torque = less stress on the plastic.
non-sert® can be used repeatedly on the same pilot hole.